Asks for

The ad says“Guide 3D Modeller on electrical Equipments and cable tray installations on 3D model development.”
The ad says“Candidates should have experience in Allen Bradley/Siemens PLC.”
The ad says“Experience in Low Voltage System design in North America, including UL508A, NFPA 70, UL698A, UL913, CSA 22.2, NFPA 497, NFPA 820 and ANSI schematics.”
The ad says“Preparation of Load list, IO list, single line diagram, system architecture, Loop drawing, Control schematic, Panel GA & BOM Fabrication Drawing documents in AutoCAD Electrical tool related to PLC and Power panel.”
The ad says“Experience in Low Voltage System design in North America, including UL508A, NFPA 70, UL698A, UL913, CSA 22.2, NFPA 497, NFPA 820 and ANSI schematics.”
The ad says“Knowledge related to interface between MCC Panel/VFD to Automation system-hardwired or soft like MODBUS or Ethernet etc.”
The ad says“Deep knowledge in instruments like 2 wire, 4 wire, HART Foundation Field bus, Profibus, etc.”
The ad says“Attending and preparing inspection reports for MCC/VFD panels and motors.”
The ad says“Experience in Low Voltage System design in North America, including UL508A, NFPA 70, UL698A, UL913, CSA 22.2, NFPA 497, NFPA 820 and ANSI schematics.”
The ad says“Knowledge related to interface between MCC Panel/VFD to Automation system-hardwired or soft like MODBUS or Ethernet etc.”
The ad says“Knowledge of Motor, MCC, VFD, PLC Panels datasheet based on UL/NEMA/CSA international codes & standards.”
The ad says“Experience in Low Voltage System design in North America, including UL508A, NFPA 70, UL698A, UL913, CSA 22.2, NFPA 497, NFPA 820 and ANSI schematics.”
The ad says“Experience in Low Voltage System design in North America, including UL508A, NFPA 70, UL698A, UL913, CSA 22.2, NFPA 497, NFPA 820 and ANSI schematics.”
The ad says“Experience in Low Voltage System design in North America, including UL508A, NFPA 70, UL698A, UL913, CSA 22.2, NFPA 497, NFPA 820 and ANSI schematics.”
The ad says“Knowledge and experience in PLC control panel FAT and SAT.”
The ad says“Deep knowledge in instruments like 2 wire, 4 wire, HART Foundation Field bus, Profibus, etc.”
The ad says“Candidates should have experience in Allen Bradley/Siemens PLC.”
The ad says“Ability to read the tender specification and prepare technical queries deviation list.”
The ad says“Experience in Low Voltage System design in North America, including UL508A, NFPA 70, UL698A, UL913, CSA 22.2, NFPA 497, NFPA 820 and ANSI schematics.”
The ad says“Experience in Low Voltage System design in North America, including UL508A, NFPA 70, UL698A, UL913, CSA 22.2, NFPA 497, NFPA 820 and ANSI schematics.”
The ad says“Experience in Low Voltage System design in North America, including UL508A, NFPA 70, UL698A, UL913, CSA 22.2, NFPA 497, NFPA 820 and ANSI schematics.”
The ad says“Experience in VFD/PLC/Control panels components selection”

Company Description

About Veolia

Veolia group aims to be the benchmark company for ecological transformation. In 2022, with nearly 220,000 employees worldwide, the Group designs and provides game-changing solutions that are both useful and practical for water, waste and energy management. Through its three complementary business activities, Veolia helps to develop access to resources, preserve available resources, and replenish them. In 2021, the Veolia group supplied 79 million people with drinking water and 61 million people with wastewater service, produced nearly 48 million megawatt hours of energy and treated 48 million metric tons of waste. Veolia Environment (Paris Euronext: VIE) generated consolidated revenue of €28.508 billion in 2021. www.veolia.com

Job Description

Must-Have Requirements

Knowledge of Motor, MCC, VFD, PLC Panels datasheet based on UL/NEMA/CSA international codes & standards.
Attending and preparing inspection reports for MCC/VFD panels and motors.
Ability to read the tender specification and prepare technical queries deviation list.
Preparation of Load list, IO list, single line diagram, system architecture, Loop drawing, Control schematic, Panel GA & BOM Fabrication Drawing documents in AutoCAD Electrical tool related to PLC and Power panel.
Estimate accurate budget hours for the completion of assigned tasks.
Experience in Low Voltage System design in North America, including UL508A, NFPA 70, UL698A, UL913, CSA 22.2, NFPA 497, NFPA 820 and ANSI schematics.
Candidates should have experience in Allen Bradley/Siemens PLC.
Complete Technical Bid Evaluation for Electrical items offers in line with codes & client specification codes, client specifications and project expectations (Cost/Time).
Knowledge and experience in PLC control panel FAT and SAT.
Experience in VFD/PLC/Control panels components selection
Deep knowledge in instruments like 2 wire, 4 wire, HART Foundation Field bus, Profibus, etc.
Knowledge related to interface between MCC Panel/VFD to Automation system-hardwired or soft like MODBUS or Ethernet etc.
Knowledge of simple electrical datasheets (Motor, MCC, PMCC, VFD, APFC Panels, cable, cable tray etc).
Knowledge of electrical load list, Single line diagram, Power and control Cable schedule, Cable tray and Earthing Layout and respective BOM’s.
Knowledge of all types of Electrical Equipment's datasheets.
Knowledge of inspection reports for Motor, MCC, VFD, PMCC and APFC Panel, cable, and Cable tray.
Guide 3D Modeller on electrical Equipments and cable tray installations on 3D model development.
Coordinate with inter-discipline for 3D modelling and layout preparation.

Good to Have Requirements (That Supports future Career progression in the Role)

Simplifying and standardisation of PLC panel design & Electrical Design
Knowledge in detail BOP Electrical engineering (Cable Schedule, Cable Tray Routing, Earthing & Lighting calculation, and Layout etc.)

Qualifications

Engineering Degree – Electrical and Electronics Engineering or Similar Technology

Minimum 10-13 years Panel design & BOP Electrical Design in Experience of Water, Wastewater, Power, Oil & Gas, or related Industry.

Additional Information

As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.