Asks for

The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”
The ad says“REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.”

Job Description

DUTIES: Lead the management of the overall die program management process at a die line level. Ensure engineering packages adhere to best practices, manage, and monitor timing through the construction and verification phase as well as facilitate and manage the transition to the secondary tryout and production facility. Ensure SPQRC metrics are attained for a die line and that lessons learned are compiled and driven into future programs. Ensure compliance with company policies and procedures. Attend Buyoff for Die Design meeting. Analyze the stamping process, suggest improvements, and apply Lessons Learned. Attend Final Die Design Review. Attend Buyoff for Die Construction meeting. Analyze the Die Machining File released for 3D machining. Develop Bearing Zone file. Apply die adjustment according to Lessons Learned from past programs. Coordinate Formability Package Validation meeting. Host First Panel Review meeting and release Priority 1 Sheet. Ensure Die Layout for part improving quality looping is according to Priority 1 Sheet. Coordinate corrective action plans for die related issues. Ensure Open Issues are complete and closed on time. Perform Jewel Radius and Zebra Analyses Processes. Perform Part Dimensional and Surfacing information for PAR meeting. Get Parts PAR White after just one quality looping per Panel. Validate event deliverable list / ITP documentation (Die Static and Dynamic reviews, and SOP 50). Support die surface treatment plans. Participate, and support T-Events. Support and attend GSQE/Painted Panel Review events. Verify Submittal of QAB's for all die and equipment related issues. Support EWOs and Die implementation. Hybrid Work Policy - 3 days In-office, 2 days remote - Must be able to report to local office.

REQUIREMENTS: Bachelor's degree in Metallurgical Engineering, Mechanical Engineering, Material Engineering, or related field of study and 5 years of experience as a Tool and Die Integration Engineer, CAD Engineer, or related role. Five years of experience with: Project Management methodologies including cost, timing, scope, quality, people management, integration, communication, risk management, procurement, and stakeholders management; GDVP, Product Engineer Release Levels, Die Operation Lineup (DOL), Die Machining File (DMF), Formability Analysis, V-Events, and T-Events; Commercial software packages including NX 11.0.2.7 (ASMS 1592), Teamcenter 11 (ASMS 1168), MS Office, Teamcenter Visualization Mockup 11.2 (ASMS 6212), GOM, AutoForm, and PamStamp); and Die Engineering Process, Formability, Die Design, Transfer and Conventional Press Lines Configuration, Patterns, Foundry, Machining, Die Construction Practices, and Try-out and T-Events.

#LI-DNI

About GM

Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all.

Why Join Us

We believe we all must make a choice every day – individually and collectively – to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team.

Benefits Overview

From day one, we're looking out for your well-being–at work and at home–so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources.

Non-Discrimination and Equal Employment Opportunities (U.S.)

General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers.

All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws.

We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire.

Accommodations

General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us or call us at 1-800-865-7580. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.