Asks for

The ad says“Experience with SPC, DoE, and lean manufacturing principles”
The ad says“Lead root cause analysis on reliability failures (electrical, optical, interfacial, mechanical, environmental) using SEM/FIB, EDS, FTIR, PL/EL, IV, quantum efficiency, adhesion, and other failure-analysis techniques; close the loop with manufacturing and design”
The ad says“Hands-on experience with PV metrology tools (eg. Sinton lifetime, EL/PL) and reliability testing”
The ad says“Lead root cause analysis on reliability failures (electrical, optical, interfacial, mechanical, environmental) using SEM/FIB, EDS, FTIR, PL/EL, IV, quantum efficiency, adhesion, and other failure-analysis techniques; close the loop with manufacturing and design”
The ad says“Experience with solar cell manufacturing equipment, such as wet chemical processing equipment, PE-CVD equipment, PVD machines, metallization and final test equipment, and wafer inspection equipment. Experience in evaporation tools and ALD tools are a plus”
The ad says“Lead root cause analysis on reliability failures (electrical, optical, interfacial, mechanical, environmental) using SEM/FIB, EDS, FTIR, PL/EL, IV, quantum efficiency, adhesion, and other failure-analysis techniques; close the loop with manufacturing and design”
The ad says“Strong understanding of vacuum systems, plasma physics, sputtering dynamics, and thin-film characterization techniques (e.g., XRD, SEM, Hall effect)”
The ad says“Own and operate the solar cell reliability lab: equipment strategy, capability roadmap, calibration, maintenance, safety, throughput, and data integrity for HJT cell and coupon reliability testing”
The ad says“Lead root cause analysis on reliability failures (electrical, optical, interfacial, mechanical, environmental) using SEM/FIB, EDS, FTIR, PL/EL, IV, quantum efficiency, adhesion, and other failure-analysis techniques; close the loop with manufacturing and design”
The ad says“Proficiency with data analysis (e.g., Python, MATLAB, JMP, R, or equivalent) and comfort with statistics (distributions, confidence bounds, DOE basics)”
The ad says“Experience with SPC, DoE, and lean manufacturing principles”
The ad says“Proficiency with data analysis (e.g., Python, MATLAB, JMP, R, or equivalent) and comfort with statistics (distributions, confidence bounds, DOE basics)”
The ad says“Experience with solar cell manufacturing equipment, such as wet chemical processing equipment, PE-CVD equipment, PVD machines, metallization and final test equipment, and wafer inspection equipment. Experience in evaporation tools and ALD tools are a plus”
The ad says“Experience with solar cell manufacturing equipment, such as wet chemical processing equipment, PE-CVD equipment, PVD machines, metallization and final test equipment, and wafer inspection equipment. Experience in evaporation tools and ALD tools are a plus”
The ad says“Lead root cause analysis on reliability failures (electrical, optical, interfacial, mechanical, environmental) using SEM/FIB, EDS, FTIR, PL/EL, IV, quantum efficiency, adhesion, and other failure-analysis techniques; close the loop with manufacturing and design”
The ad says“Strong understanding of vacuum systems, plasma physics, sputtering dynamics, and thin-film characterization techniques (e.g., XRD, SEM, Hall effect)”
The ad says“Hands-on experience with PV metrology tools (eg. Sinton lifetime, EL/PL) and reliability testing”
The ad says“Experience with solar cell manufacturing equipment, such as wet chemical processing equipment, PE-CVD equipment, PVD machines, metallization and final test equipment, and wafer inspection equipment. Experience in evaporation tools and ALD tools are a plus”
The ad says“Proficiency with data analysis (e.g., Python, MATLAB, JMP, R, or equivalent) and comfort with statistics (distributions, confidence bounds, DOE basics)”
The ad says“Proficiency with data analysis (e.g., Python, MATLAB, JMP, R, or equivalent) and comfort with statistics (distributions, confidence bounds, DOE basics)”
The ad says“Strong understanding of vacuum systems, plasma physics, sputtering dynamics, and thin-film characterization techniques (e.g., XRD, SEM, Hall effect)”
The ad says“Lead root cause analysis on reliability failures (electrical, optical, interfacial, mechanical, environmental) using SEM/FIB, EDS, FTIR, PL/EL, IV, quantum efficiency, adhesion, and other failure-analysis techniques; close the loop with manufacturing and design”
The ad says“Hands-on experience with PV metrology tools (eg. Sinton lifetime, EL/PL) and reliability testing”
The ad says“Experience with solar cell manufacturing equipment, such as wet chemical processing equipment, PE-CVD equipment, PVD machines, metallization and final test equipment, and wafer inspection equipment. Experience in evaporation tools and ALD tools are a plus”
The ad says“Experience with SPC, DoE, and lean manufacturing principles”
The ad says“Strong understanding of vacuum systems, plasma physics, sputtering dynamics, and thin-film characterization techniques (e.g., XRD, SEM, Hall effect)”
The ad says“Proficiency with data analysis (e.g., Python, MATLAB, JMP, R, or equivalent) and comfort with statistics (distributions, confidence bounds, DOE basics)”
The ad says“Strong understanding of vacuum systems, plasma physics, sputtering dynamics, and thin-film characterization techniques (e.g., XRD, SEM, Hall effect)”
The ad says“Strong understanding of vacuum systems, plasma physics, sputtering dynamics, and thin-film characterization techniques (e.g., XRD, SEM, Hall effect)”
The ad says“Experience with solar cell manufacturing equipment, such as wet chemical processing equipment, PE-CVD equipment, PVD machines, metallization and final test equipment, and wafer inspection equipment. Experience in evaporation tools and ALD tools are a plus”
The ad says“Experience with solar cell manufacturing equipment, such as wet chemical processing equipment, PE-CVD equipment, PVD machines, metallization and final test equipment, and wafer inspection equipment. Experience in evaporation tools and ALD tools are a plus”
The ad says“Strong understanding of vacuum systems, plasma physics, sputtering dynamics, and thin-film characterization techniques (e.g., XRD, SEM, Hall effect)”

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

SR. SOLAR CELL RELIABILITY ENGINEER (STARLINK) 

Starlink believes in providing fast, reliable internet to those that need it most. We design, build, and launch the world's largest and most advanced satellite constellation that is capable of delivering high-speed internet to even the most remote locations. As we vertically integrate critical hardware, we are building and scaling heterojunction (HJT) solar cell production to power spacecraft and constellation assets with higher efficiency, lower mass, and proven reliability in the space environment.

We are looking for a Sr. Solar Cell Reliability Engineer who will own the reliability lab and the end-to-end reliability story for our solar cells in space—from wafer and cell process through module integration, environmental qualification, on-orbit performance, and continuous improvement back into manufacturing. Your work will ensure our solar cells deliver unmatched power density and durability for Starship, Starlink, AI Sat, and deep-space missions. Your work will form the backbone of the Starlink network (photons of sunlight in is directly proportional to photons of data out to customers!) and help provide internet to tens of millions of customers all around the world.

RESPONSIBILITIES: 

Own and operate the solar cell reliability lab: equipment strategy, capability roadmap, calibration, maintenance, safety, throughput, and data integrity for HJT cell and coupon reliability testing
Define, execute, and continuously improve the space reliability test matrix for HJT solar cells (e.g., thermal cycling, thermal vacuum, humidity/damp heat as applicable, UV/photo-stability, reverse bias / hotspot, mechanical shock/vibration at cell/coupon level, radiation exposure coordination, and accelerated life tests)
Build and own the reliability narrative for flight and program reviews: failure modes, physics of failure, acceleration models, life predictions, margins, and acceptance/qualification logic that ties lab data to on-orbit performance
Partner with HJT process and equipment engineering (texturing, PECVD/a-Si stacks, TCO, metallization, module integration) to link process parameters, metrology, and in-line defects to reliability outcomes; drive corrective actions and design-for-reliability changes
Establish reliability gates for process changes, tool qualifications, material substitutions, and supplier changes; own risk assessment (FMEA/PFMEA interfaces), sampling plans, and release criteria
Develop and maintain test methods, SOPs, fixturing, and automation for high-throughput, statistically defensible reliability characterization; ensure methods are transferable and auditable
Lead root cause analysis on reliability failures (electrical, optical, interfacial, mechanical, environmental) using SEM/FIB, EDS, FTIR, PL/EL, IV, quantum efficiency, adhesion, and other failure-analysis techniques; close the loop with manufacturing and design
Define and track reliability KPIs (e.g., degradation rates, wear-out distributions, infant mortality, lot-to-lot variation, correlation of accelerated tests to flight-like stress) and report status to leadership with clear recommendations
Interface with power systems, structures, thermal, radiation effects, quality, and flight reliability teams so cell-level reliability is coherent with array/module and spacecraft environments
Support flight anomaly investigation and on-orbit performance trending; update models and test strategies as flight data matures.
Mentor technicians and junior engineers; set lab culture for rigor, speed, and honest interpretation of data
Author and present technical content for design reviews, production readiness reviews, and customer/internal reliability packages as required

BASIC QUALIFICATIONS: 

Bachelor’s degree in an engineering discipline
5+ years of experience in chemical engineering, materials science, electrical engineering, physics, or mechanical engineering in design, analysis, and/or system implementation

PREFERRED SKILLS AND EXPERIENCE: 

Master’s degree or Ph.D. in chemistry, chemical engineering, materials science, environmental, or related technical discipline (especially in PV, thin-film devices, reliability physics, or space power systems)
7+ years of hands-on experience in solar cell, PV module, semiconductor device, or aerospace hardware reliability (internship/co-op experience may count toward this if highly relevant and hands-on)
Experience designing, running, or analyzing accelerated environmental or reliability tests and interpreting degradation / failure data
Proficiency with data analysis (e.g., Python, MATLAB, JMP, R, or equivalent) and comfort with statistics (distributions, confidence bounds, DOE basics)
Ability to work full-time on-site in a production and lab environment
Strong understanding of vacuum systems, plasma physics, sputtering dynamics, and thin-film characterization techniques (e.g., XRD, SEM, Hall effect)
Hands-on experience with PV metrology tools (eg. Sinton lifetime, EL/PL) and reliability testing
Experience with SPC, DoE, and lean manufacturing principles
Self-motivated with strong organizational, written, and oral communication skills
Experience with solar cell manufacturing equipment, such as wet chemical processing equipment, PE-CVD equipment, PVD machines, metallization and final test equipment, and wafer inspection equipment. Experience in evaporation tools and ALD tools are a plus

ADDITIONAL REQUIREMENTS: 

Ability to travel frequently for work, potentially for extended periods of time during machine buyoffs and startup
Ability to lift 25 lbs. unassisted
Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position
Willing to work extended hours and weekends as needed

ITAR REQUIREMENTS:

To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.

Asks for

Values